Forward's F12 two-post lift is gold certified with a 12,000 pound capacity for raising most passenger cars, trucks, and vans. With two heavy-duty push hydraulic cylinders designed to increase lift performance and minimize down-time. Cylinders are located in each column concealed within the carriage itself. Durable powder coat finish provides exceptional protection from the wears a shop will see over the years. Forward's spring operated arm restraints are just one feature that keep these heavy duty lift arms constantly performing at their peak performance.
Features:
- 154" Overall Height
- Hydraulic cylinders in each column
- Full Stroke
- Cylinder rod concealed inside carriage
- 72-1/2" Rise | 77-1/2" Rise (With 5" adapter extensions)
- 2 Stage Arm Design
- Overhead cable equalization
- Single Point lock release
- Large rubber-padded swivel adapter with extra height extensions (3.5" and 5") are standard
- Spring operated arm restraints, disengage at floor level
- 2-stage front and rear arms
- Durable powder coat finish
| Specifications | F12 |
| Capacity | 12,000 lbs. |
| Maximum Rise | 77-1/2″ With 5″ adapter extension |
| Adjustable Overall Height Options | I12N300 13’ 10″ Standard I12N301 14’ 10” Max. Height I12N302 12’ 10” I12N303 11’ 11” |
| Overall Width | 11’ 8″ or optional 12’ 2″ |
| Drive Through Clearance | 102-3/4″ or optional 108-3/4″ |
| Overhead Switch Height Options | I12N300 160 1/8″ Standard I12N301 172 1/8″ Extended I12N302 148 1/8″ I12N303 137 1/8″ |
| Front Arm Reach (Min./Max.) | 27 3/4” / 59” |
| Rear Arm Reach (Min./Max.) | 27 3/4” / 59” |
| Min./Max. Adapter Height | 4-3/4″ w/ no adapter extension 9-3/4″ w/ 5″ adapter extension |
| Width Inside Columns | 114 7/8” Standard 120 7/8″ Optional |
| Voltage/Amps | 208-230v, 17 amps |
| Motor/Phase** | 2HP / 1 PH |
| Ceiling Height Required | 168″ (4267mm) |
Specifications subject to change without notice or liability. *Lifts available in blue (BL) and red (RD) | |