Accessories

Coats 1180 : Brake Lathe Silencer Rotor Clip-On

Brake Lathe, Silencer, Rotor, Clip-On

COATS 2165-AFT : Brake Lathe, (4000) - Motor (1HP) - Aftermarket

COATS® 2165 Aftermarket Brake Lathe Motor (1HP)

COATS 2165Bracket-AFT : Brake Lathe, (4000) - Motor Bracket - Aftermarket

COATS® 2165 Aftermarket Brake Lathe Motor Bracket

COATS 3024 : Brake Lathe, (3000/4000) - Small Pulley

COATS® 3024 Brake Lathe Small Pulley

COATS 3085-AFT : Brake Lathe, (4000) - Spindle Protective Boot - Aftermarket - Rubber

COATS® 3085 Aftermarket Brake Lathe Rubber Spindle Protective Boot

COATS 3142 : Brake Lathe, (4000) - Brass Plug, Approximately 5/16" Diameter (10 pk)

COATS® 3142 Brake Lathe Brass Plug (10 pk)Approximately 5/16" Diameter

COATS 3164-AFT : Brake Lathe, (3000/4000) - Oil Seal, Large

COATS® 3164 Aftermarket Brake Lathe Oil Seal, Large

Coats 40610-AFT : Brake Lathe Bits Round Positive Rake (10 pk)

Brake Lathe, (40630) - Brake Lathe Bits, Round, Positive Rake (10 pk)

Coats 41412-AFT : Brake Lathe1" Arbor Double Chuck & Four Backing Plates Lightweight AFTERMARKET

Brake Lathe, (1" Arbor) - Double Chuck (2.125" - 5.75") & Four Backing Plates - Lightweight - AFTERMARKET

COATS 6854 : Brake Lathe, (4000) - Knob, Red Three Arm

COATS® 6854 Brake Lathe Knob, Red Three Arm

Coats 6914-10 : Brake Lathe, (4000) - Brake Lathe Bits, Negative Rake (10 pk) *

Brake Lathe, (4000) - Brake Lathe Bits, Negative Rake (10 pk) *

Coats 6936 : Brake Lathe Twin Cutter Extension

Brake Lathe, (6950) - Twin Cutter Extension (up to 17-1/2" x 1-7/8" on 4000 Series)

Coats 70040-AFT : Brake Lathe 1 inch Arbor Single Chuck & One Backing Plate

Brake Lathe, (1" Arbor) - Single Chuck (2.125" - 3.50") & One Backing Plate

Coats 7681-10-AFT : Brake Lathe Brake Lathe Bits Positive Rake (10 pk)

Brake Lathe, (ALL) - Brake Lathe Bits, Positive Rake (10 pk) - 0.032" Radius

Coats 9800 : Brake Lathe Silencer Spring Vented Rotor

Brake Lathe, Silencer Spring, Vented Rotor

COATS 9836 : Brake Lathe, (4000) - Plug - Each

COATS® 9836 Brake Lathe Plug (each)

PRO-CUT 50-4250 : Quick Chuck Kit

PRO-CUT 50-4280 : Dust Containment System

Fits Pro-Cut B17 with mobile cart option only. Includes large removable chip tray, vacuum port, and side and top doors with viewing windows. Ships by truck freight. Not compatible with 50-4260.

PRO-CUT 50-660: Tool Box Complete

All the tools to use any Pro-Cut model. Includes 6mm T-handle, 2.0mm allen for gib adjustment, tip screws, 5mm allen for adjusting tool arms, chip brush, indexing crayon, 6mm / 8mm wrench.