EMAX ESP05V080I3PK : Premium Industrial 5 HP 19 CFM 3P 80 Gal. Vertical Tank w/ Silent Air

Emax

$4,999.00

SKU:: PQS-ESP05V080I3PK
Voltage:: 208V
HP:: 5 HP
CFM:: 11-20
Tank Size:: 80 Gal
Tank Orientation:: Vertical
Phase:: 3 Phase
Motors:: Simplex
Quite:: Quite

Product Description

This Industrial 5 HP 2 Stage Inline 3 Phase Vertical 80 Gallon Piston Air Compressor with 30 CFM Dryer Bundle is designed for up to 50,000 hours industrial use with proper maintenance. This unit features our low RPM pumps and delivers 19 CFM @ 100 PSI. Our unit features automatic or continuous run functionality and is SUPER COOL & SUPER QUIET!

Silent Air Quiet Air Compressor

Engineered and manufactured in the U.S.A. The whisper series compressors reduce stationary compressor DBA ratings by as much as 25%! A noise suppression device was first conceived by EMAX engineers after feedback from competitor compressor users revealed many complaints regarding the extreme noise level of their compressors in a work environment. Stationary air compressor noise levels typically require owners to incur the added expense of a building or structure to house the compressor to reduce noise in the work environment. The Whisper can be installed and operated in all Garage, Farm Shop, and Industrial applications which eliminate the need for traditionally expensive and often inadequate separate buildings or structures to house the air compressor. The Whisper silent air systems are already installed on the back of the tank with brackets that are fabricated for easy removal and low profile.

The Whisper dissipates compressor intake noise by channeling the intake air through a series of baffle plates and pre-filter media within the silencer cabinet. As a result, the piston intake noise is trapped and dissipated within the silencer structure. As a result, the piston intake noise is trapped and dissipated within the silencer structure. It also acts as a secondary filtration for cleaner air.

Patented Pressure Lubricated 2-stage cast iron pump with dual control design allows for automatic or continuous run rated at up to 70,000 hours based on B-10 bearing life rating

At the core of our Emax compressors is our pump. These pumps are SUPER quiet in operation and built to last! We start with a solid cast iron crankcase. Unlike some competitor’s aluminum body crankcases – our solid cast iron crankcase will ensure stable crankshaft alignment and will handle more workload under heavy load conditions.

Our pump also features a precision balanced solid cast iron crankshaft with Timken-Style stainless steel roller bearings on the front and rear of the crankshaft to ensure smooth & efficient operation with less drag and less energy use.

Our pumps also feature several other key components that ensure durability and performance!

All steel connecting rods with replaceable rod bearing inserts. This allows our rods to be rebuilt! 99% of our competitors now use “throw-away” aluminum connecting rods in their pumps that have no re-build capability.
Removable 100% cast iron cylinders. These solid cast iron cylinders are more stable under heavy workloads and do not warp from heat. Most of our competitors are using aluminum cylinders with a pressed-in sleeve that warp under extreme heat. This makes competitor pumps good for about a 40-50% duty cycle – while claiming a 100% duty cycle. Most of the pumps with aluminum cylinders must be replaced in 1-2 years because they would not hold up under heavy use. Not our Air pumps! Our solid cast iron cylinders can “take the heat” and are designed to perform on heavy load demands.
All cast iron cylinder heads. Cast iron heads are more durable and dependable for trouble free operation.
“Disc valve design” intake and exhaust valves. Disc valves have been around for over 100 years and have been proven to perform. Most of our competitors are using “throw-away” reed valves which are not nearly as durable and can’t be re-built. Our disc valves come right out of the top of the cylinder head where they can be serviced in minutes instead of hours like reed valves.
Top quality compression and oil rings. Our rings ensure performance with low oil carry over (1-5 PPM).
Precision ground pistons machined to tight tolerances ensures low oil carry over.
Premium “non-absorbent” gaskets prevent oil seepage from pump.
All cast iron flywheel with built-in fan. The extra weight of our cast iron flywheel during run cycle gives the pump more “throw” on the compression stroke which will result in fewer loads on the electric motor. Some manufacturers use aluminum flywheels that do not have the proper weight ratio to give the proper throw on the compression stroke when the pump is running.
Built-in head unloaders. These unloaders are built into the intake valve assembly on the compressor head and perform a valuable function. They unload or open the intake valves under constant run applications. This feature reduces internal pump heat from compression because the intake valve is held open throughout the unloading cycle. This allows fresh air to come into the cylinder chamber. Under the compression stroke, the unloader holds the intake valve open allowing the air to blow back out the intake filter. This fresh air absorbs the heat out of the pump under heavy workloads.
Built-in inter-cooler and after-coolers. The inter-cooler allows air to be cooled between stages while the air cooled after-cooler provides a second cooling stage that cools the air before it goes into the tank. Our after-cooler also includes an all copper main feed line from the pump into the tank.

Specifications
Specifications

Specifications

CFM @ 100 PSI	19
Compressor Stage	Two
Pump RPM	800
Pump Material	Solid Cast Iron
Pump Model	APP2I0524TP
Dimensions LxWxH	42 X 34 X 75
Product Weight	620
Motor RPM	1750
Motor Phase	Three
Voltage available	208/230/460
Tank Size	80 Gallon
Tank orientation	Vertical
Tank Outlet Size	3/4"
Tank Drain	Timed Automatic
Certifications	CSA, ASME,ETL
Noise Rating (DBA)	62
Warranty	1 Year Standard, 5 Year Extended, Lifetime Extended
Running AMP	14 AMP @ 208/230 VOLT / 6 AMP @ 460 VOLT
Recommended Breaker	20 AMP @ 208/230 VOLT - 15AMP @ 460 VOLT
Max PSI	175
Oil Capacity	2 Quarts
Drive Type	Belt Driven
Tank Size	80 Gallon

Specifications

Voltage 208V

HP 5 HP

CFM 11-20

Tank Size 80 Gal

Tank Orientation Vertical

Phase 3 Phase

Motors Simplex

Quite Quite