Alignment Tools & Adjustment Kits

This wrench makes it easy to adjust the control arm cams on many modern GM and Chevy HD Trucks along with the new Colorado and Canyon. The tool surrounds the entire perimeter of each cam to provide a solid no slip means to reach the hard-to-reach and...

This angle gauge is an easy, accurate way for measuring frame and drive shaft angles. An ideal tool to ensure the drive line angle is still within specification for raised and lowered vehicles. Alignment equipment manufacturers are using frame angle...

Previously 7190 Tie Rod Tool Kit. This kit includes part numbers 71959 through 71999. It will allow adjustment of most cars and light trucks and also includes the 2 larger adjusting tools needed for the new Ford Super Duty pickups. Tools have a 1/2"...

These cams (set of 2) replace the OE camber and toe adjustment cams and provide additional camber and toe changes. Adjustments slots will need to be elongated using 85130 Rotary File Set or equivalent.   Rear Adjustment range: Camber ±2.0° Toe ±2...

These wrenches make presetting the new adjustable truck sleeves, 24120, 24130, 24160, 24180, easier for the installer. When using the 74400 wrench it is recommended that the opening be equally positioned over the slot opening of the sleeve body. 1-1/2"...

A necessary tool for removing the alignment inserts on the upper control arm alignment brackets without damaging the bracket. Includes a center punch and an offset punch.

Center Punch Stud for SPC 74910 Cam Knockout Punch.

A Full Contact Dual Angle shim consisting of only four part numbers that corrects Toe and Camber with one shim.   Instruction sheets are included in each shim package. Various combinations of the shims and shim accessories are included on 88700 Dual...

A Full Contact Dual Angle shim consisting of only four part numbers that corrects Toe and Camber with one shim.   Instruction sheets are included in each shim package. Various combinations of the shims and shim accessories are included on 88700 Dual...

An adjustable steel plate extends the length of the bar to put constant pressure on the brake pedal.

These 1/2" square drive impact sockets are deep and thin walled to reach areas conventional sockets can't. Provides two sizes: 3/4" and 13/16"

Replacement Vial for SPC 81139 Magnetic Adj Camber Gauge